Select Page

Genright – Universal Outboard Rear Shock Mount Kit



The GenRight outboard rear shock mount kit for the Jeep TJ, LJ, YJ or CJ-7 was designed to accept 2.0″ coil over shocks.

It is a perfect way to convert your rig to Coilover shocks!

The clean and simple design which “frenches” (recesses) into the side of your Jeep’s frame and maximizes your dampening control at the wheel.

The kit is also designed to allow you to position the axle to achieve the desired wheelbase.

Why do it this way?

  • So you can run longer shocks and move the lower shock mount “up” flush with the bottom of the rear axle for maximum ground clearance.
  • So you can run coilovers and keep your back seat / cargo area.
  • Instead of re-locating the coil spring mount and figuring out where to re-mount the shock (when stretching the wheel base), we recommend this outboard rear shock mount as a total solution. 


  • Optimal shock position for maximum dampening control.
  • Allows you to run long travel shocks without cutting through the rear inner fender well.
  • Laser cut from 1/4″ thick steel and CNC formed.
  • MIG welded by GenRight artists.
  • Includes (2) large laser cut gussets.
  • Super wide shock mount opening (1-3/4″ wide) will not bind on long travel shocks
  • By relocating the shocks outboard, it allows for more exhaust routing options.
  • Can be used with 2.0″ diameter coil over or regular type shocks (that use a 1/2″ bolt top & bottom).
  • Can be used on standard coil spring or leaf spring type vehicles too!
  • Made in USA. 


  • (2) Upper Shock Mounts (Shock Towers, Frame Side).
  • (2) Lower Shock Mounts (Axle Side).
  • (4) Upper Shock Tower Gussets.
  • Includes Grade 8 shock mounting hardware.
  • New wider spacers (for the 1-3/4″ wide mounting).
  • Detailed installation instructions.

These mounts are universal and can be cut or trimmed to be mounted in any position. Lower mounts are welded onto the back of the housing near the brake caliper and do not hang down!

These are made extra long, so 1 size fits all applications. The towers can be trimmed to fit from 8″ to 18″ travel shocks and is perfect for most vehicles.

We recommend and sell the KING 2.0″ or FOX emulsion type shocks (in coil over or non-coil type) with a Dual Rate spring set that are valved specifically for the rear Jeep suspension. These shocks are also fine tuneable by you by changing oil level, oil weight and nitrogen pressure.

Can be used with stock or after market bump stops. Compatible with most body lifts 2″ or less.


  • Must be used in conjunction with a separate bump stop (do not use the rubber bumper on the shock as a bump stop) These can be purchased at GenRight SUP1002 and SUP1020.
  • All shocks purchased from GenRight are priced in pairs and include everything needed (Pre-valved for a Jeep, 2 different spring rates, sliders, etc.).
  • Depending on the width of your rear axle, the rear caliper may need to be flipped from the rear of the axle to the front to allow the lower mount to be moved out further.
  • We offer a shorter version RSM-1000 version of this shock mount.
  • We also offer a larger version that goes up to 3″ diameter coil over shocks RSM-1040.

Click on the picture to see larger more detailed images!


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

  • No products in the cart.