Jeep Corner Guard Set Standard 97-06 Wrangler TJ Rear Aluminum Bare GenRight




Product Details

This is the GenRight Off Road Full Aluminum Corner Guard set for the Jeep TJ. These are a direct bolt-on and a perfect upgrade to better protect your Jeeps tub and Not adding much extra weight! This model is an ideal choice for anyone who is weight conscientious and wants to Armor Up their trail rig or cover previous damage.

  • For the Jeep TJ Wrangler
  • Superlight weight version of our Full corner guards, saves 49lbs over steel version
  • Laser cut from 3/16 inch thick 6061-T6 Aluminum Alloy
  • The 90 degree bend is formed with a single hit die on a CNC press brake to assure this product matches the shape of your Jeeps tub
  • Stock wheel opening shape is retained the same to still fit a standard TJ fender flare or the GenRight metal tube Rear flare P/N TFR1000 or TFR1001 and remain street legal
  • Each set of panels has the factory mounting holes laser cut in for the tail lights, tailgate hinges and gas filler to make installation quicker
  • The mounting holes are pre-drilled and countersunk - we use 2 more mounting bolts than other brands to secure the corner to the tub
  • Includes large 5/16 inch flush type countersunk Stainless Steel bolts to securely mount our corners to protect your Jeeps tub and look clean
  • Fits on top of most 6 inch tall aftermarket 3/16 inch thick Rocker Guards or rock sliders
  • Unpainted Finish
  • Sold As A Set


  • We recommend our corner guard backing plates P/N CNR-7000 to add extra stiffness to the tub
  • We offer matching Rocker Guards P/N RCG-2002 or RCG-2003 and Mini boat sides Rockers are also available
  • The stock license plate mounting holes have been Removed from the drivers side panel. Because the stock location is much to vulnerable. We recommend using our license plate relocation bracket/light kit to get the license plate moved into the center of the spare tire P/N LPM-4006
  • This product requires drilling of the body/tub to properly mount them
  • The stock Rear flare mounting holes have been Removed from these panels. If you are installing Rear flares, you Will need to drill New mounting holes in the corner guard panel
  • This Corner Guard is also available in a lower cost steel version P/N CNR-2002
  • We offer a bolt-on - No Cutting LED tail light upgrade as an option
  • Wheel openings on corner guard and body can be trimmed to fit Bigger tires
  • We Do noot make a model specifically for Hi-Fender flares, the wheel openings Will need to be trimmed to match the tube flare P/N TFR-1020 or TFR-1021 by the installer
  • The Full Corners are sold unpainted and should be Fully fitted, then Removed for painting
  • Recessed or Flush type LED tail lights P/N LED-1100 can be installed by cutting a 4-1/2 inch diameter hole
  • We also offer a matching Aluminum Tub Panel Guard P/N TPG-2011
  • We also offer this product in an Aluminum Blank with Nowheel well, holes or hinge cut outs
  • Approximately 6lbs each
  • Typical install time is 4 hours total

View More