Jeep Corner Guard Set Stretch 97-06 Wrangler TJ Rear Aluminum Bare GenRight

CNR-2013-GEN

$599.99

Quantity

Product Details

This is the GenRight Off Road Full Aluminum Stretch Corner Guard set for the Jeep TJ. These are a perfect upgrade to better protect your Jeeps tub And Not add much extra weight! This model is an ideal choice for anyone who is weight conscientious and wants to Armor Up their trail rig or cover previous damage. It is best to select this model when Stretching your Rear axle back to keep the wheel opening centered over the relocated axle. Why do you need that? So you can maintain that clean factory look and be able to re-mount the Rear flares.
Features:

  • Fits the Jeep TJ Wrangler
  • Wheel opening is moved back/Stretched 4 inches to fit with our EXT gas tank P/N GST2002
  • Laser cut from 3/16 inch thick 6061-T6 Aluminum Alloy
  • The 90 degree bend is formed with a single hit die on a CNC press brake to assure this product matches the shape of your Jeeps tub
  • Stock wheel opening shape is retained same to still fit a standard TJ fender flare or the GenRight metal tube Rear flare P/N TFR1000 or TRF1001 and remain street legal
  • Each set of panels has the factory mounting holes laser cut in for the tail lights, tailgate hinges and gas filler to make installation quicker
  • The mounting holes are pre-drilled and countersunk. We use 2 more mounting bolts than other brands to secure the corner to the tub
  • Includes large 5/16 inch size countersunk Stainless Steel flush type bolts to securely mount our corners to protect your Jeeps tub and look clean
  • Includes a New molded plastic fuel bezel to allow the 4 inch shift backward of the wheel opening
  • Fits on top of most 6 inch tall aftermarket 3/16 inch thick Rocker Guards or rock sliders
  • Unpainted Finish
  • Sold As A Set

Notes:

  • Wheel base Stretch is done with the suspension arms, Not the traditional way of cutting the frame and body
  • The Stretch corner guard is a clean cosmetic way to re-locate the wheel opening Rearward to match the New Rear axle location under the vehicle
  • We recommend running our longer Stretch Rocker Guards P/N RCG-5002 or RCG-5003 to match the New relocated wheel opening. Stretch Mini boat sides Rockers are also available
  • The stock license plate mounting holes have been Removed from the drivers side panel. Because the stock location is much too vulnerable, we recommend using our license plate relocation bracket/light kit to get the license plate moved into the center of the spare tire P/N LPM-4006
  • This product requires drilling of the body/tub and some cutting of the factory sheet metal to properly mount them
  • The stock Rear flare mounting holes have been Removed from these panels. If you are installing Rear flares, you Will need to drill New mounting holes in the corner guard panel
  • We offer a bolt-on with No Cutting LED tail light upgrade as an option
  • Wheel openings on corner guard and body can be trimmed to fit Bigger tires
  • We Do noot make a model specifically for Hi-Fender flares, the wheel openings Will need to be trimmed to match the tube flare P/N TFR-1020 or TFR-1021 by the installer
  • The Full Corners are sold unpainted and should be Fully fitted then Removed for painting
  • The same corner guard is also available in a less expensive steel version P/N CNR-2003
  • Recessed or Flush type LED tail lights P/N LED1100 can be installed by cutting a 4.625 inch diameter hole
  • We also offer a matching Aluminum Tub Panel Guard P/N TPG-2011
  • We also offer this product in a Blank with Nowheel well, holes or hinge cut outs
  • Approximately 12lbs.
  • Typical install time is 5 hours total

View More