Jeep Shock Mount Kit Rear Outboard 77-06 Jeep TJ, LJ, YJ, CJ Steel Bare GenRight

The GenRight outboard Rear shock mount kit for the Jeep TJ, LJ, YJ or CJ-7 was designed to accept 2 inch or 2.5 inch coil over shocks It is a perfect way to convert your rig to Coilover shocks. The clean and simple design which frenches (recesses) into the side of your Jeep frame and maximizes your dampening control at the wheel. The kit is designed to allow you to position the axle to achieve the desired wheelbase.
Why do it this way?

• So you can run longer shocks and move the lower shock mount up flush with the bottom of the Rear axle for maximum ground clearance
• So you can run coilovers and keep your back seat and cargo area
• Instead of relocating the coil spring mount and figuring out where to re-mount the shock (when Stretching the wheel base), we recommend this outboard Rear shock mount as a total solution

Features:

• Works on Jeep TJ, LJ, YJ, or CJ-7
• Optimal shock position for maximum dampening control
• Allows you to run long travel shocks without cutting through the Rear inner fender well
• Laser cut from 1/4 inch thick steel and CNC formed
• MIG welded by GenRight artists
• Includes (2) large laser cut gussets
• Super wide shock mount opening (1.75 inches wide) Will Not bind on long travel shocks
• By relocating the shocks outboard, it allows for more exhaust routing options
• Can be used with 2 inch or 2.5 inch diameter coil over or regular type shocks (that use a 1/2 inch bolt top and bottom)
• Can be used on standard coil spring or leaf spring type vehicles too
• Welding required
• Made in the USA
• Unpainted Finish
• Sold As A Kit

Includes:

• (2) Upper Shock Mounts (Shock Towers, Frame Side)
• (2) Lower Shock Mounts (Axle Side)
• (4) Upper Shock Tower Gussets
• Grade 8 shock mounting hardware and spacers
• Detailed installation instructions

Notes:

• These mounts are universal and can be cut or trimmed to be mounted in any position. Lower mounts are welded onto the back of the housing near the brake caliper and Do noot hang down
• These are made extra long, so one size fits all applications. The towers can be trimmed to fit from 8 inch to 18 inches travel shocks and is perfect for most vehicles
• We recommend and sell the KING 2 inch or 2.5 inch diameter (or Fox) emulsion type shocks (in coil over or non-coil type) with a Dual Rate spring set that are valved specifically for the Rear Jeep suspension. These shocks are also fine tuneable by you by changing oil level, oil weight and nitrogen pressure.
• Can be used with stock or after market bump stops. Compatible with most body lifts 2 inches or less
• Must be used in conjunction with a separate bump stop (Do noot use the rubber bumper on the shock as a bump stop) These can be purchased at GenRight SUP1002 and SUP1020
• All shocks are priced in pairs and include everything needed (Pre-valved for a Jeep, 2 different spring rates, sliders, etc)
• Depending on the width of your Rear axle, the Rear caliper May need to be flipped from the Rear of the axle to the front to allow the lower mount to be moved out further
• JK guy? We offer a Rear shock mount specifically for you. Its the RSM-8025 and takes up to a 3 inch diameter coil over shock