RockJock 60VXR - Jeep JK Front Crate Axle

CE-KF6502A48

$7,785.90

Select Wheel Bolt Pattern
Select Gear Ratio
Select Locker
Quantity

Product Details

The RockJock® 60VXR high pinion front crate axle is simply the strongest 60 series axle that we offer, designed for extreme off-road use with up to 40-inch tires and V8 conversion horsepower. The RockJock 60VXR is built to the legendary Currie Standard and loaded with exclusive features including: a stronger reinforced stage-2 radius bottom center section, ring gear load bolt, large 3.5-inch axle tubes plus much more. If you seek out the most challenging routes and toughest obstacles to conquer then the RockJock 60VXR is the crate axle of choice. When purchased on the Web, a JK big brake master cylinder and booster upgrade is included to assure optimum brake performance.

The RockJock® 60VXR high pinion crate axle for the 2007 and newer Jeep JK Wrangler, is a complete bolt-in axle assembly with all required brackets and mounts in place. The vehicles factory drive shaft will require modification or replacement to accommodate the larger 60 series housing and 1350 series u-joint.

 

 **This Price Includes The JK Big Brake Master & Booster (CE-P5160050)**

 

Built to the legendary Currie Standard with exclusive features including:

  RockJock 60VXR stage-2 high-pinion nodular iron center section is simply the strongest 60 series casting we offer, with heavier main caps, ARP® main bolts, and 9 lbs. more reinforcement in critical areas over the already strong RockJock 60 center
     
  Ring gear load bolt (top left) eliminates gear deflection, to dramatically increase torque handling capacity. The load bolt typically sits .002 inch from the ring gear, and only touches when the gear begins to deflect under high torque loads
     
  RockJock 60VXR high-pinion radius bottom center section delivers unmatched ground clearance, and improved obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
     
RockJock AR400 Skid Plate   Replaceable AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
     
  Large diameter outer pinion bearing (right) is designed for the demands of reverse rotation/high pinion housings. Stock low pinion bearing (left)
     
  High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminating oil starvation issues
     
  Large 3.5-inch diameter .375 wall axle tubes (left) are three times stronger than the stock JK Dana® 44 (right) without being overweight or sacrificing ground clearance
     
  Massive forged 1 ton inner knuckles (right) are designed to stand up to the severe punishment of larger tires without flinching
     
  Upper control arm mounts feature rebuildable Johnny Joints® for maximum suspension articulation with unsurpassed durability
     
  Super strong RockJock nodular iron front cover protects expensive internals, adds structural support to the housing's face flange and locates the driver’s side upper control arm mount
     
  Big 13 inch diameter vented rotors (over 1 inche larger than stock) provide the increased brake torque required for stopping large tires
     
  Large dual piston calipers complete the 60VXR's big brake package and provide the extra byte required to stop large tires
     
  Upgraded JK brake master cylinder and booster (included with web orders) are volume matched to the larger calipers for optimum brake performance
     
  Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
     
  Black satin powder coat finish adds long lasting protection against rust and corrosion to keep your RockJock 60VXR looking its best

 

 

Notes

ABS Sensors - Does not include ABS sensors, the factory sensors from the stock axle must be retained and installed on the RockJock housing

Computer Programming: 2012 and newer vehicles require a computer programmer, such as the AEV ProCal Module to reset the gear ratio and tire height in the vehicle's computer for proper function of the vehicles stability control and transmission shift points

Brake Upgrade: The big brake kit included with the VXR60 uses 13.25-inch rotors with dual-piston calipers to provide the stopping power required for 37-inch and larger tires. In order for the larger calipers to function properly the stock booster and master cylinder must be upgraded, which is why every RockJock 60VXR web purchase includes a JK master cylinder and booster upgrade.

Wheel and Tire Size: 17-inch of larger wheels are required for proper clearance of the brake calipers. Maximum recommended tire size is 40"

Wheel Bolt Pattern: Requires wheels with 5 on 5 1/2"

Wheel Studs: Includes 1/2 inch wheel studs

Overall Width: Axle width is 70 inches (+4.6 inches over stock) between wheel mounting surfaces. Additional width improves turning angle with 37 inch and larger tires

Steering Stabilizer: Ram assist brackets are not compatible with and exclude the use of conventional steering stabilizers

Differential Carriers: Carriers provided by Currie for the 60VXR, are turned down to 8.300" O.D. for load bolt clearance. If a standard O.D. carrier is installed the load bolt will need to be backed out to prevent damage.

 

View More