Description
This is the newest Laser Cut and Puzzled Cage Kit for your Jeep Wrangler TJ (1997 – 2006) from GenRight Off Road.
It is the most protective, complete replacement weld-in cage available on the market.
Precision Fit – Laser Cut and notched tubes are CNC Mandrel Bent (the best way) and puzzle together for a “jigless” kit that is easy to assembly in your Jeep. Each tube has the part number etched on it so you can follow the step-by-step assembly diagram.
Unrivaled Functionality – Maximum visibility thanks to an ultra low profile dash bar and works with your factory hard top and soft tops and doors.
Safety First – The 1-3/4″ DOM tubing and solid Six-Point mounting provides unmatched safety.
All the tubes are cut to length and notched to fit together like a “puzzle” you just need a welder to put it all together.
Features:
- Maximum visibility – Designed with super low-profile dash bar.
- Works with factory hard (optional factory soft top adapter kit is available).
- Can be used with hard (full or half) doors or soft doors.
- Protection for rear seat passengers too.
- Made from .120″ thick wall 1 3/4″ D.O.M. (Drawn Over Mandrel) seamless tubing.
- All the tubes are CNC Mandrel Bent and Laser Cut with keys for a precision, puzzle like assembly.
- Laser Cut and CNC formed 3/16″ thick cage to tub mounting brackets.
- Does not require cutting the dash.
- Kit can be shipped to you by FedEx in three boxes.
- The tubes can be fitted without a jig and tacked in place so you can weld it together.
- 6 point mounting to the vehicle (includes plates to tie A-pillars into the rockers too).
- Includes 2 grab handles, as pictured.
- Optional re-enforcement bars are available (at the dash and behind the seats) and recommended for maximum protection.
- Includes bracket mounting kit to accept all the factory seat belts.
- Includes detailed step by step installation instructions.
Notes:
- This kit is sold un-welded and welding is required by the end user.
- It is always best to build the roll cage in the Jeep it will be used in.
- This KIT requires complete removal of the stock roll bar (and most of the interior).
- Both factory seat belts and 5-point harnessed can be used.
- After welding the cage, it is possible to remove the entire roll cage for powder coating.
- Factory soft top requires a optional adapter kit to re-mount the factory door surrounds.
- See Cage Options when checking out.
- Due to the grab handle placement on the A-pillar, the corner of the sun visors will need to be trimmed to swing properly.
- If there is any chance you want an aluminum roof, it is MUCH more economical for shipping to order it with the cage.
Optional Accessories:
- Cage to Frame Tie-in Kit
- C-Pillar Roll Cage Tie In Kit for Jeep TJ
- Behind Seat Bar, C Pillar
- 1/8″ Thick Aluminum Roof
- Dash V-bar
- Behind the Seat X Bar
- Harness Bar
Reviews
There are no reviews yet.